View the catalog Distribution network


  • Number of operation control: 3
  • Lightning: LED 2x2,5 W
  • Variants: 500/600/700mm
  • Filters: aluminium, washable grease filters
Available colors:

Vilpe® fan

  • Models with various power and motor efficiency
  • Suitable for each kind of roof and ventilation duct
  • 5 years warranty
  • Wide range of colors
  • Removable hat of roof fan
  • Work efficiently in all conditions
    from -30°C to + 80°C (temp. constant)
    from -40°C to +120°C (temp. temporary)
  • Equipped with thermal insulation to prevent condensation of water vapor
Wentylator dachowy Vilpe®

High class engine and aerodynamic construction of the head constitute of extraordinary efficiency VILPE® roof fan. It is matched to a standard size of ducts and ventilation pipes, easy to use and easy to install, regardless of the type of roofing material.
P-type roof fans are mounted on the roof, together with the suitable pass-through, can be installed on all roofs with the most common roof slopes (max. 50 degrees).

S-type roof fans are designed for installation on ducts in a horizontal plane. They therefore constitute a good solution for roofs with low slope and mounted on existing ducts for natural ventilation.
Roof fans VILPE® stands durability (outer casing is made of high quality polypropylene), high resistance to mechanical damage and harsh weather conditions. Regardless of temperature and climatic conditions (tested in both arctic and tropical) fans are working very well. Lifetime roof fans VILPE® dating back 15-20 years. The motors are long-lived and rarely fail. Our offer includes a wide range of models, sizes and power fans, allowing them proper selection adapted to the requirements of ventilation of the building.


Recommended models fan for the PH-26 hood

* approximate of the maximum fan capacity (for the loss of compression 50 Pa, equivalent to the length of the ventilation duct between the hood and the fan on the roof approx. 5 mb)
1 approximate net price of set included: cooker hood + roof fan VILPE ® + instalation set, to specify price of set suitable for your kitchen please contact with our distributor or counselor

Hood - technical dataMore

  • Type of hood:Cabinet
  • Width:50/60/70 cm
  • Surface:Stainless steel
  • Lightning:2x2,5W
  • Grease filter:Aluminium
  • The check valve ("butterfly"):Included
Documents for download

Fan - technical dataMore

In this system, we recommend models:
Vilpe E190
max. capacity ok. 450 m3/h*
Vilpe E220
max. capacity ok. 720 m3/h*
Vilpe ECo 190
max. capacity ok. 650 m3/h*

* indicative of performance for the highest engine speed (for a pressure drop of 50 Pa and the sample length of vent pipe between the eaves and the fan on the roof approx. 5mb)